Our advice can help you eliminate surface defects and hydrogen pinholes
Many surface defects in cast iron such as hydrogen pinholes can easily be avoided. Titanium, aluminium and moisture are the common causes of hydrogen pinholes in greensand systems. Both Al and Ti lower the surface tension of the liquid iron allowing gasses to be more easily picked up.
Hydrogen pinholes have a distinctive graphite lining within the cavities. Elkem produces a range of MgFeSi alloys and inoculants with very low Al to help keep the aluminium content below the critical levels for pinhole generation.
Hydrogen pinholes in grey iron Close up shows graphite lining
Hydrogen can also be a problem in ductile iron where it tends to form porosities.
Hydrogen porosity in ductile iron Close-up of hydrogen porosity in ductile iron
Nodule depleted zone in ductile casting with hydrogen pinholes.
Hydrogen pinholing: H2O + C à H2 + CO. Followed by: 2 CO à C + CO2. This is the reason for the nodule depleted zone.
Nitrogen fissure defects
Predominantly a grey iron problem in medium to heavy sections adjacent to resin bonded mould or core materials, these are smooth-faced fissures or irregular cavities, perpendicular to the surface, extending a few millimetres into the casting. Internally, the cavities are black and shiny with dendrites penetrating into the cavity and a graphite depleted zone surrounding the holes. These defects are avoided by using low nitrogen core binder systems in conjunction with low nitrogen recarburisers such as Elgraph®, whilst any residual nitrogen can be neutralised by using Zircinoc® inoculant which ties up nitrogen as relatively harmless zirconium nitride.
Nitrogen fissure defect Close-up of nitrogen fissure
Elkem’s technical service engineers understand the mechanisms which can cause surface defects and we have the knowledge and the products to help you to avoid them.
Whether steel or cast-iron projects: Our highest quality products ensure flawless castings and the results you are targeting .
To submit a form, you must first allow us to collect form cookies. This is for us to be able to contact you or send you the materials required. Remember, you can always withdraw such consent at any time by selecting "manage cookies" at the bottom of our pages.