Silicone Gels
Medical grade silicone gels for healthcare applications
Silbione™ RT Gels have been designed to meet the specific penetration, viscoelasticity and low viscosity requirements for fashion, comfort care and pressure relief applications. For light-weight applications like external breast prostheses, Elkem Silicones offers low density gels that are 20-40% lighter than standard gels.
Elkem Silicones extended its range of Silbione™ RT Gels to meet the needs of manufacturers and users. Our medical grade silicone gels are painless to remove, hold tightly on the sin during everyday movements, do not leave residue on skin, and provide efficient coatweights to keep manufacturing costs in check. Silbione™ gels can be encased in Silbione™ RTV or light-weight open-cell silicone foams for a comfortable cushioning effect.
Silbione™ Gel application solutions:
- Cushioning
- Dampening
- Light weight prosthesis
Click here to see our products
Pressure care & Cushions
| SilbioneTM | Color | Penetration mm/10 |
Viscosity Pa.s |
Max work. time | Density | Biocompatibility support * |
| RT GEL 4220 | Translucent | 190 | 1 | 50' at 23°C | 0,98 | ♦ |
| RT GEL 4521 LD | White | 190 | 6 | 60' at 23°C | 0,72 | ♦ |
External breast prosthesis
| SilbioneTM | Color | Penetration mm/10 |
Viscosity Pa.s |
Max work. time | Density | Biocompatibility support * |
| RT GEL 4022 | Skin | 220 | 0.3 | 10' at 80°C | 0,98 | ♦ |
| RT GEL 4123 | Skin | 230 | 0.6 | 10' at 80°C | 0,98 | ♦ |
| RT GEL 4023 ADV | Skin, Trans | 240 | 0.25 | 7' at 70°C | 0,98 | ♦ |
| RT GEL 4029 ADV | Trans | 275 | 0,98 | ♦ | ||
| RT GEL 4622 SLD | Skin | 220 | 6.5 | 60' at 23°C | 0,6 | ♦ |
Foam
| SilbioneTM | Color | Penetration mm/10 |
Viscosity Pa.s |
Max work. time | Density | Biocompatibility support * |
| RT FOAM 4230 | White | DS00 40 | 15 | Rise time 4' at 23°C Demold time 30' |
0,25 | ♦ |
*Silbione™ grade materials have been tested for biocompatibility according to applicable ISO 10993 and/or USP Class VI standards. These grades are not supported for implantation 30 days and more.
The typical properties listed above are not intended for use in preparing specifications for any particular application.
User has sole responsibility to determine product suitability for intended uses and applications.
Customized grades upon request. Elkem also supplies additives to adjust the product properties.